Product Description

 

Chlorinated Polyethylene (CPE 135A) for Plastics and Rubber/UPVC Processing Aids	OEM Part Number:TMR-S-95-PF05-V; Efficiency:Beta 6{c} >= 1000 (ISO 16889 DFE); Collapse Rating:150; Max Temp (F):250; Adhesive:Epoxy; By-Pass:None; End Cap:Corrosion Resistant CS/AL; Flow Direction:Out/In; Media Type:Microglass supported both sides; Recommended Change Out (psid):25; O.D.:2.25; Length:8.47; Seal Material & Type:Viton O-Ring; Quantity per Carton:1; Weight per Filter (lbs):2.0000;
ODM Standard High Chlorinated Polyethylene CPE for Chemical	Weight:15.0 LB; Mounting:Flange Mount; Rotation:Right Hand (CW); Port Size:SAE-16; Port Type:SAE; Shaft Key:N/A; Design No.:20; Flow @ RPM:4 gpm @ 1200 rpm; Shaft Dia.:0.875 in; Shaft Type:13 Tooth Splined; GPM @ Speed:6 gpm @ 1800 rpm; Pump Series:V10; Shaft Length:1 5/8 in; Pressure Port:SAE-8; Seal Material:Buna-N; Max. RPM [Max:3400; Pressure [Max:2500 psi; GPM @ 1,800 rpm:6; Inlet Port Code:S;
CPE, 135A, Chlorinated Polyethylene, Impact	Model Code:EverTough; Pre-Damper:No; Clutch Size:15.5 in; Product Name:Eaton EverTough Manual Adjust Clutch; Product Width:17 in; Torque rating:1700 ft lb; Catalog Number:108925-82AM; Product Height:7.25 in; Product Weight:129 lb; Facing Material:Ceramic; Number of Discs:2 EA; Input shaft size:2.00" - 10; Portfolio rating:Better; Product Diameter:17 in; Hydraulic Linkage:No; Transmission Type:Manual;
CPE 135A Chlorinated Polyethylene for PVC Pipe	OEM Part Number:TMR-S-95-PF05; Efficiency:Beta 6{c} >= 1000 (ISO 16889 DFE); Collapse Rating:150; Max Temp (F):225; Adhesive:Epoxy; By-Pass:None; End Cap:Corrosion Resistant CS/AL; Flow Direction:Out/In; Media Type:Microglass supported both sides; Recommended Change Out (psid):25; O.D.:2.25; Length:8.47; Seal Material & Type:Buna O-Ring; Quantity per Carton:1; Weight per Filter (lbs):2.0000;
CPE 135A Plastic Additives, Chlorinated Polyethylene	Category:Mounted Units & Inserts; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:0.005; Product Group:M06110;
CPE Chlorinated Polyethylene 135 a	Inside Diameter:5 19/32 (142.1) One End; Compatible Competitor Part Number:Palatek 8000019; Outside Diameter:5 3/4 (146.0) Flange 8 1/2 (215.9); Length:10 3/32 (256.4); Contains:[8] Holes in Flange; Notes:CAUTION: Do not remove staples from gaskets. These staples provide electrical grounding continuity between defogger and tank.; Product Type:Oil/Air Separator Element; Division:Engine Mobile Aftermarket;
High Quality Chlorinated Polyethylene CPE135A Price	OEM Part Number:HP52NL6-100WV; Efficiency:100 Micron; Collapse Rating:450; Max Temp (F):225; Adhesive:Epoxy; By-Pass:None; End Cap:Plated CS; Flow Direction:Out/In; Media Type:N/A; Recommended Change Out (psid):25; O.D.:3.1; I.D.:1.6; Length:6.3; Seal Material & Type:Viton O-Ring; Quantity per Carton:1; Weight per Filter (lbs):2.0000;
CPE135A Chlorinated Polyethylene	Pre-Damper:No; Clutch Size:15.5 in; Product Name:Eaton EverTough Self-Adjust Clutch; Product Width:17 in; Torque rating:1650 ft lb; Catalog Number:109701-51AM; Product Height:7.25 in; Product Weight:131 lb; Facing Material:Ceramic; Input shaft size:2.00" - 10; Portfolio rating:Better; Product Diameter:17 in; Hydraulic Linkage:Yes; Transmission Type:Manual; Damper Spring Count:9 EA; Product Length/Depth:17 in;
Chemical Auxiliary Agent CPE Chlorinated Polyethylene	Model Code:EverTough; Pre-Damper:No; Clutch Size:15.5 in; Product Name:Eaton EverTough Self-Adjust Clutch; Product Width:17 in; Torque rating:1700 ft lb; Catalog Number:109701-82AM; Product Height:7.25 in; Product Weight:133 lb; Facing Material:Ceramic; Input shaft size:2.00" - 10; Portfolio rating:Better; Product Diameter:17 in; Hydraulic Linkage:Yes; Transmission Type:Manual; Friction pad count:4 EA;
Good Quality Chlorinated Polyethylene CPE 135A for PVC Pipe	OEM Part Number:HP3202M60VN; Efficiency:60 Micron; Collapse Rating:450; Max Temp (F):225; Adhesive:Epoxy; By-Pass:None; End Cap:Plated CS; Flow Direction:Out/In; Media Type:N/A; Recommended Change Out (psid):25; O.D.:3.11; I.D.:1.6; Length:9.18; Seal Material & Type:Viton O-Ring; Quantity per Carton:1; Weight per Filter (lbs):4.0000;
High Quality Chlorinated Polyethylene CPE 135A	OEM Part Number:HP46L15-60WV; Efficiency:0 Micron; Collapse Rating:425; Max Temp (F):225; Adhesive:Epoxy; By-Pass:None; End Cap:Corrosion Resistant CS/AL; Flow Direction:Out/In; Media Type:N/A; Recommended Change Out (psid):25; O.D.:5.48; I.D.:2.85; Length:15.78; Seal Material & Type:Viton O-Ring; Quantity per Carton:1; Weight per Filter (lbs):3.0000;
Chlorinated Polyethylene (CPE) , for PVC Impact Modifier, Plastic, Rubber Industry	OEM Part Number:319479; Efficiency:Beta 6{c} >= 1000 (ISO 16889 DFE); Collapse Rating:450; Max Temp (F):225; Adhesive:Epoxy; By-Pass:None; End Cap:Corrosion Resistant CS/AL; Flow Direction:Out/In; Media Type:Microglass supported both sides; Recommended Change Out (psid):25; O.D.:1.75; I.D.:0.875; Length:6.2; Seal Material & Type:Viton O-Ring; Quantity per Carton:1; Weight per Filter (lbs):0.5000;

 

Chlorinated polyethylene - Wikipedia

Chlorinated polyethylene (PE-C or CPE) is an inexpensive variation of polyethylene, where chlorine is substituted for some of the hydrogen atoms.

Differences among CPE Gloves, TPE Gloves and PE Gloves

CPE and TPE Gloves are much stronger than PE, but more expensive than it, and can't be so thinner. TPE Gloves are called second generation of CPE gloves too, ...

CPE vs. TPE Gloves: A Quick Guide - Omni International Corp.

Oct 16, 2019 — CPE gloves are made of polyethylene, a kind of resin (i.e., organic compound) created during the polymerization process of ethynylene.

Difference Between PE Gloves, CPE Gloves and TPE Gloves

Aug 26, 2020 — PE is short for polyethylene. There are many types of PE gloves including HDPE gloves, LDPE gloves, CPE gloves and TPE Gloves.

PE-CE Lessons

PE-CE is a term that is often used in MPLS VPN networks. The PE (Provider Edge) is the router that is located at the provider network and that is connected ...

Things To Consider When Purchasing Disposable CPE Gloves

Dec 2, 2021 — You can easily choose one that suits your needs. What is the CPE Glove? CPE Gloves Manufacturer Cast Polyethylene gloves are transparent gloves ...

Cast Polyethylene (CPE) Disposable Gloves - Industrial Grade

Cast Polyethylene (CPE) Disposable Gloves - Industrial Grade. CPE200. - Clear polyethylene resin material - Improved performance compared to standard PE ...

4 VPN and Connectivity Services

Customer Edge (CE) routers are those routers at the customer premises that have a direct interface to the PE router. These are sometimes known as CPE (Customer ...

What's differences among PE CPE TPE Gloves - Pidegree ...

Jul 31, 2020 — From 2000, a new PE gloves appreared in the maker, it is CPE gloves .It is heavier, so it is much durable and stronger than HDPE, LDPE gloves .

Why we normal people should choose CPE or TPE gloves

Aug 14, 2021 — As you see in the table, PE gloves are sealed different from CPE and TPE gloves, so the sealed temperature is much lower than them, this is one ...

 

High Quality Chemical Auxiliary Agent CPE 135A Chlorinated Polyethylene Video